LED Riser for P1S supports cabel management for xtouch display
Copyright Claim
LED Riser for P1S supports cabel management for xtouch display
Boost
25
61
46
Print Profile(3)
0.2mm layer, 3 walls, 15% infill
Designer
3.6 h
2 plates
0.6mm nozzle, 0.3mm layer, 3 walls, 15% infill
Designer
4.6 h
2 plates
No brim, 0.2mm layer, 3 walls, 15% infill
3.5 h
2 plates
Boost
25
61
46
0
168
281
Released
Description
Easy LED Riser fits for P1S and supports cable management for xtouch display and LED mounting.
This LED Riser is compatible with my xtouch display xtouch enclosure.
Comment & Rating (46)
All
Nice design, question can you add a bigger "lip" so it accommodates a 2mm thick EDM strip?
The designer has replied
0
Reply
Do you mean the area marked in blue?
0
Reply
Like this?
(Edited)
0
Reply
sorry late reply,I mean top lip one where you put the glass
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
Good print and design. I found the brims were not needed - I’ll put up a separate profile that I found worked well without brims. Thanks for sharing!
0
Reply
With the no-brim version I could finally get this put together. The other versions kept breaking when connecting.
0
Reply
Print Profile
No brim, 0.2mm layer, 3 walls, 15% infill
Great design and minimalistic which I appreciate. Only thing I would like is a bit more of a closer fit to the size of the top glass. There is a slight gap so when a print is going and shaking the printer (with the anti-vibration feet installed), the top glass can move around without adding any kinds of anti-slip material between the riser and the top glass. Great design still!
0
Reply
I like the design, just for the love of me I can't put the pieces together, there is no tolerance. My filament is calibrated., so don't know what's going on...
The designer has replied
0
Reply
Mhh sounds crazy, the tolerance is tight but it works fine so far for me and other users. 🤔
0
Reply
Replying to @user_2457679161
¯\_(ツ)_/¯ maybe type of filament.
0
Reply
Print Profile
No brim, 0.2mm layer, 3 walls, 15% infill
Printed great without the skirt & saved some filament <3
2
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
Worked as expected. Cutout was in a perfect place for the XTouch cable.
The designer has replied
1
Reply
Thank you 😉
0
Reply
What kind of LED's do you advice to use?
The designer has replied
0
Reply
You can use any LED you want. But the LED should be dimmable or not too bright. I integrated mine into the smart home. This solution isn't bad either and works great. https://a.aliexpress.com/_EzqVf5J
1
Reply
Does this also fit the P1S?
The designer has replied
0
Reply
Yes, it fits for the X1 and the P1S. For the P1P is a different one.
0
Reply
I printed it without the raft and it came out fine. The fitment was tight but that is a good thing. thank you!
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
Excellent, good for rise and put led strip!!!
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRemixes (3)
Click to see more
Related Models
© 2024 MakerWorld