一个用于适配拓竹盲盒套件(led lamp 001)的转接件，适用直径不超过57mm的，安装孔距为D24mm，3个孔径4mm的圆形LED灯板，孔孔距离约21mm。这是一个简化版本。

An adapter for adapting to the LED lamp 001 blind box kit, suitable for circular LED light panels with a diameter not exceeding 57mm and mounting holes of D24mm. There are three 4mm holes with a hole distance of approximately 21mm.This is a simplified version.

安装方式：卡好灯板后，插入耗材丝固定。

Installation method: After clamping the lamp board, insert the filament to fix it.

照片上是使用petg打印的测试件，很合适。

The photo shows the test piece printed using Petg, and it fits perfectly.