Snap-on Split- Wall mount
Snap-on Split- Wall mount
Print Profile(1)
Description
Hi all! I wanted a snap-on lightbox I could mount in my toolbox, but needed it to be a bit longer than what my A1 plate would allow. I made this version into 2 different lightboxes that can be easily glued. There are passthroughs that can be aligned before the backplate is glued on so you can route the led strip. I also made the backplate with wall mounts as an option.
I forgot to take pictures but I glued 8 magnets on the backplate.
The red strip on the box was done on bambu studio by simply cutting at 25mm and 30mm then painting that part red, but dont worry this is included in the print profile.
The settings in the print profile is what works for me. I have noticed that if I use a first layer flow rate of 1.02 with bambu filament it works perfectly on my A1, but on my X1C its a bit much.
If there are any questions on assembly or any requests to modify the model please let me know and I will be glad to help!
If you print this light box I would love to see them or know how everything went with the profile!
Comment & Rating (1)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
