This Bottle-Holder is for 0,5L NRW Beer-Bottles (check the pictures) with a diameter of ~70mm and a height of ~260mm. It's the type of bottle that's mainly used in Austria, Germany and Swiss.
It should stop them from rolling around inside your fridges. I also strongly recommend the suction pads, as they stop the Bottle-Holder from sliding around. :)

I made the files from scratch with Fusion360 but I have been inspired by Arne S.
(https://www.printables.com/de/model/210593-beer-bottle-holder-for-the-fridge-different-bottle)

----------------------------------------------------------------------------------------------------------------

If you want to help me out a bit and see some stuff I made, work in progress, or models before they will be here consider liking and following my Facebook page, thank you very much - it means a lot to me! :)

----------------------------------------------------------------------------------------------------------------

• Print with:
  • PLA
  • 3 wall loops and top/bottom shell layers
  • 5% infill
  • no supports are needed for any part
  • no brim needed for any part
  • use slow speed - else the nozzle may push against the beams

• Parts:
  • NRW_Bottle_Holder_Modular_3X
    • A row of three spaces for your bottles
    • ~150g filament
    • 213x73x151mm
  • NRW_Bottle_Holder_Modular_1X
    • A space for your bottle
    • ~50g filament
    • 73x73x151mm
  • NRW_Bottle_Holder_Modular_Bolts
    • 4 printable bolts, for one side.
    • ~5g filament per set
    • 5x5x10mm
  • NRW_Bottle_Holder_Modular_Suction
    • 4 printable bolts, to attach suction pads.
    • ~5g filament
    • Made for usage with the 20mm ones found here: Suction Pads @Amazon EU
      This is my Amazon ref-link, won't make a difference for you, but helps me :)

• Six Pack:
  • 2 times NRW_Bottle_Holder_Modular_3X
  • 3 times NRW_Bottle_Holder_Modular_Bolts
  • Some glue may be needed
  • ~300g filament
  • optional suction pad adapters are available

• Updates:
  • none so far

----------------------------------------------------------------------------------------------------------------

I'm looking forward to your comments and makes. :)