DE

(Happy) Filament Spulen Abroller.

(Happy, weil der Abstandshalter ein einen Smiley ähnelt.)

Materialliste:

4x 608er Kugellager

4x M2,5-3x8-16 Schrauben

Nach dem Drucken die Lager in die Rollen bis Anschlag einpressen und zusammenbauen.

Aktuellste Version unter folgendem Link Online als 3D Modell zu betrachten: https://a360.co/3ivj1sB

EN

(Happy) Filament Spool Dispenser.

(Happy because the spacer resembles a smiley face.)

Material:

4x 608 Bearing

4x M2,5-3x8-16 Screws

After printing, press the bearings into the rollers as far as they will go and assemble.

The latest version can be viewed online as a 3D model under the following link: https://a360.co/3ivj1sB

V1 - First release.

Notes:

Infill 35% and little knobs that hold Bearing 55. But u can choose infill as u like. Even with 0% it should work fine.
Support only for the Roller, touching build plate. The bumps face down to the bouldplate.

Post-Printing

Bild vom zusammengebauten Abroller

Wurde in 0.3mm gedruckt. Ist für alle gängigen Filament Rollen benutzbar.

If you need help, have questions or want to collaborate, please feel free to join my discord server: https://discord.vr6syncro.de

If you want to support me or thank me you can do it here

Thanks, Alex