this is a 4 tealight candelabra I think this could make a great gift and look nice on your mantelpiece or table. I use with led tealights that I got from Amazon. It will fit any tealights with a diameter of 37.7 mm max but i can only recommend led as they don't create heat. i would guess this could be scale up to fit other sizes. this is a long print it took me 16 hours on my printer @ 45mm/s.
dimensions
150mm high
140mm wide at top 110mm at bottom
95mm deep at top 60mm at bottom
i printed this with a 0.4mm nozzle at 0.2mm layer heights with a 15% infill 3 wall lines no supports need it took 16 hours at 45mm/s speed at 100% scale
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.