I have redesigned the cover since, when printing, it didn't turn out very well due to having a vaulted arch. This way, it can be printed resting on the top, and we avoid defects by using only 75 more grams of filament.

Furthermore, I have modified the hygrometer support so that it can be used with Xiaomi's BLE with very few supports, and I have made the axes circular so that they can be printed vertically (the ones with a polygonal profile did not rotate at all for me).

For the cover, I have uploaded two versions: a rounded one with a 2 mm radius and another with the original radius of 12.5 mm.

Additionally, I have slightly lowered the part where the cover fits into the body of the desiccator near the hinges. The original design would catch for me, forcing the pieces and even causing one of the hinges to break.

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

He rediseñado la tapa dado que al imprimir no quedaba demasiado bien por tener un arco de bóveda, de esta forma puede imprimirse apoyado en la parte superior y evitamos que queden defectos usando solo 75 gramos más de filamento.

Además, he cambiado el soporte del higrómetro para que pueda usarse el BLE de xiaomi con muy pocos soportes y he hecho los ejes circulares para que de impriman de forma vertical ( a mi no me giraban en absoluto los que tenían un perfil poligonal). DE la tapa he subido dos versiones. Una redondeada con 2 mm de radio y otra con el radio original de 12,5 mm.

Además, he rebajado ligeramente la parte donde encaja la tapa en el cuerpo del desecador en la zona de las bisagras. el original a mi se me enganchaba forzando las piezas llegando incluso a romperme una de las bisagras.