Carbon Rods Cleaner V2 X-Axis (simple)
Copyright Claim
Carbon Rods Cleaner V2 X-Axis (simple)
Boost
676
1237
368
Print Profile(6)
0.2mm layer, 3 walls, 15% infill
Designer
37 min
1 plate
#FINE, 0.16mm layer, 3 walls, 15% infill
40 min
1 plate
Variable layer height - 0.2mm layer, 4 walls, 0% infill
40 min
1 plate
0.2mm layer, 3 walls, 15% infill
37 min
1 plate
Click to see more
Boost
676
1237
368
1
2 k
1.3 k
Released
Description
★ New ★ Update from 29.12.2023 Automatic Z-Axis Lube Helper ★ here is the link https://makerworld.com/de/models/112326#profileId-120249
Take a look at my new Wiper upgrade Adapter also Simple
★ New ★ Update ★ Rod Cleaner Set + Tool Case here is the link https://makerworld.com/de/models/99424#profileId-105992
★New Upload
- Complete Rod Cleaner Z-Axis with Logo
- Rod Cleaner Z-Axis Without Logo (simple) Single Version
- Rod Cleaner Z-Axis with Logo (simple) Single Version
- Carbon Rods Cleaner V2 X-Axis (simple) it´s now a little bit smoother and branded with the BL Logo if you need it an like it. Sorry dont know how to put a 2nd version in the last model.
Print the model
- grab a sponge :-)
- cut out 2 pieces with a size of 20mm x 30mm
- place these in the model
- fill it up with ISO ( Isopropanol) and clean the rods
easy to use, easy to clean
If you like it, rate it. THX
Have FUN
Comment & Rating (368)
All
Print Profile
0.2mm layer, 3 walls, 15% infill
Bambu Lab Basic Blue Grey PLA and Basic Black PLA. Thank you.
The designer has replied
1
Reply
THX 🤗
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
printed perfectly. had few problems but were due to a tangle in the filament
The designer has replied
1
Reply
THX the print looks great
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
Printed great with PLA. Thank you.
The designer has replied
1
Reply
like the color combo :-)
0
Reply
Not sure how to rate this thing but it turned out awesome! Was quick and easy
The designer has replied
1
Reply
THX alot :-)
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
Think my sponges are a bit too tall but it works great
The designer has replied
1
Reply
a little bit, but if it's work :-)
0
Reply
Awesome! Printed clean and works as intended.
The designer has replied
1
Reply
Thank you very much
0
Reply
Print Profile
#FINE, 0.16mm layer, 3 walls, 15% infill
very good
1
Reply
THX
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
This printed perfectly, no strings or visible drooping anywhere. The part turned out great, now I just need a sponge to sacrifice!
The designer has replied
1
Reply
THX :-)
0
Reply
Came out good. I used the .16 profile.
The designer has replied
1
Reply
nice nice
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
Nice
The designer has replied
1
Reply
nice colour combo
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld