2024-01-12: Changed the locking pins to have more strength and better alignment.

This model is designed to work with my Wall Control Universal Mounting System.

It uses some parts from that package in addition to the STL models in this package.

Two different versions available. One for 20mm-30mm poles; the other for 30mm-40mm poles. I have also included a custom gear that fits a rubber ¾"-½" o-ring that I found at Home Depot; the o-ring is an alternative to a rubber band to hold metal rods.

Insert the gear first by pushing the gear down onto the “tooth”. Connect the wings to each side of the back plate using biscuits and slot it into the pegboard. Once slotted, screw it down using the locking pins.

Parts required:

• Gravity Broom - Back Plate
• Gravity Broom - Gear
• Universal - Wing (2 slot) - Left
• Universal - Wing (2 slot) - Right
• Universal - Locking Pin (x2)
• Universal - Biscuit (x4)
• Rubber O-ring (x2) [optional]

You can find other models I have released for this mounting system here:

https://makerworld.com/en/u/2811301167/collections/111107

If you appreciate my models, please consider buying me a coffee!