Radius Gauges in MM - A Set to print or customize by Coat Over

Coat Over

Tools>Measure Tools

Print Profile(2)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

Two colored set, 2 to 16mm.

Designer

1.3 h

1 plate

5.0(6)

One colored set, 2 to 16 mm

Designer

1.3 h

1 plate

5.0(3)

Boost

Released

Description

A full set of radius-gauges from 2 to 16 mm in 0.5mm steps, quickly to print. Also a fully customizable OpenScad-file for you to create your own gauges. Open it in OpenScad* or easier in the customizer of Makerworld**. You can also use one of the browser versions of OpenScad*** and change the parameters to your liking.

Create in Inches:

Same Gauges in Inches, see: https://makerworld.com/en/models/137615

If you make your own set of gauges, please put them here as a profile so we can both enjoy them.

Happy Gauging :)

*More information about the fantastic and challenging program OpenScad can be found here: https://en.wikibooks.org/wiki/OpenSCAD_User_Manual|
You can download the free and opensource OpenSCAD here:
http://www.openscad.org/downloads.html

**You can use the customizer of Makerworld by pressing the “Customize” button and select the Scad-file. Change the parameters, press “Generate” and if you like what you see press “Download”.

***You can also try a webbrowser version without installing anything. Like: https://openscad.cloud/openscad/ . Copy the code in the scad-file and paste the code at the left side in the browserversion of openscad. Open the customizer and have fun.

Comment & Rating (14)

@dclutter

Boosted

Print Profile

Two colored set, 2 to 16mm.

ok these were just what I needed! I was going to model something like this myself but I decided to look and see if someone else already did. Saved me lots of time! I used the parametric model to create them up to 30mm. I will load the print profile after they are done printing. thank you so much!

The designer has replied

@CoatOver

Nice, thanks for sharing :) Please share the profile. Did you use Makerworlds Customizer? Glad they implemented it fully now.

@dclutter

Boosted

Replying to @CoatOver :

Yes I did. Worked perfect! I will post it later today!

@Piet.L

Boosted

Print Profile

One colored set, 2 to 16 mm

Works great

The designer has replied

@CoatOver

Thanks for sharing :)

@fabriziocip

Print Profile

One colored set, 2 to 16 mm

GOOD

@user_1126734467

Print Profile

Two colored set, 2 to 16mm.

These are perfect. I like that they have both inside and outside radius. The only problem i had was one of the smaller radius didn't adhere to plate. It only effected that one piece and the rest printed just fine. The plate wasn't clean so my bad.