Eiffel Tower by MarkelL

MarkelL

Art>Sculptures

Print Profile(3)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

Easy to remove tree supports, 0.16mm layer, 2 walls, 15% infill

Designer

7.3 h

1 plate

4.3(227)

More Support

9.1 h

1 plate

4.0(3)

A1 Mini 80% scale, 0.16mm layer, 3 walls, 15% infill

6.6 h

1 plate

3.0(1)

Boost

498

837

284

3.1 k

1.8 k

Released

Description

Eiffel Tower model with easy to remove supports

Comment & Rating (284)

@hokokheng1966

Paris Eiffel Tower, DIY Led light up lighting with bottom base.

(Edited)

The designer has replied

@MarkelL

Looks awesome, thanks for printing!

@hokokheng1966

hi hi, thank for your comment and like ..😊

@s.emlinger

@hokokheng1966 Can you give a link for the led ?

@NV.Desings

Print Profile

Easy to remove tree supports, 0.16mm layer, 2 walls, 15% infill

some stringging issues. Also poor durability

The designer has replied

@MarkelL

I am sorry to hear that. Mine seems to be fairly durable. Do you remember which filament you used to print it? Both stringing and low durabiliry can sometimes be explained by filament being wet. Could you try drying it and try again?

@Unreal_real

I had some stringing too but it was ok (:

@egrep_

Print Profile

Easy to remove tree supports, 0.16mm layer, 2 walls, 15% infill

I used the Bambu PLA Metal copper/brown filament. I love the results. The supports came right off with no resistance. Just a tiny bit of stringing under the second landing, I see much more on other photos. That also just rubbed right off. Thoroughly delighted, thank you for sharing this!

The designer has replied

@MarkelL

Thanks for printing!

@bobbow17

very happy with the results. thanks.

The designer has replied

@MarkelL

Thanks for printing!

@Ron007

Print Profile

Easy to remove tree supports, 0.16mm layer, 2 walls, 15% infill

printed well. supports ripped the fencing off though. looks really good others

The designer has replied

@MarkelL

Thanks for printing!

@escala.z

Print Profile

Easy to remove tree supports, 0.16mm layer, 2 walls, 15% infill

🥰

The designer has replied

@MarkelL

Thanks for printing!

@escala.z

Replying to @MarkelL :

My pleasure 😀

@ThokiPrints

Print Profile

Easy to remove tree supports, 0.16mm layer, 2 walls, 15% infill

printed twice with 2 different brands a pla. both came out great.

The designer has replied

@MarkelL

Thanks for printing!

@cyclone9698

Print Profile

Easy to remove tree supports, 0.16mm layer, 2 walls, 15% infill

great on both p1p and a1 full. used bambu PLA basic and texture plate. supports work great and easy to remove but hand rail on first level is too thin and breaks off with the support. however, still excellent build and nobody will notice. photo on left brown is end product and ALL needed the support system.

(Edited)