This model is inspired by the 1960 Yoeman Credit Racing version of the Cooper T51. It's not a particularly attractive car, but it has some interesting design elements that I wanted to try to create. It also wasn't very successful on the track, with only 2 podium finishes and no Constructors' points.
This model didn't come out as accurate as I would have liked, but I'm making it available in case someone likes it.
BONUS: The car is pictured with show wheels and tires, not legal for racing. Models are included for the show wheels and tires, in case you'd like to use them. (The larger tires obviously are intended for the rear.)
What is a "pinewood derby car shell"?
A pinewood derby is an event created by the Boy Scouts many years ago. Each scout is given a pinewood derby kit typically consisting of a block of wood with slots for axles, 4 wheels, and 4 nails to be used as axles. The scout (and his dad, usually) will then carve the block of wood into the shape of a car, paint it and apply stickers, install the wheels on the axles, and then race it at the "derby", which involves a sloped track with a timekeeping apparatus.
An official scout derby will usually require that the parts in the kit be used for cars entered in the derby. Other organizations (including workplaces) often hold derbies, too, and some of them require the use of the parts in the box, including the block of wood.
These "pinewood derby car shells" are intended to be used with an official derby wood block, cut down to size, along with the axles and wheels included in the kit. A printable model of the shaped wood block is provided. You can either use the printed model or use it to accurately cut an official wood block down to size.
Notes:
Car body: Supports are required. You can choose to print "Body.stl" and add your own raft, or you can print "Body with Minirafts" for a minimal raft-like surface that will aid in keeping the supports adhered to the build surface.
Windshield: I printed this using clear PLA in vase mode.
Exhaust pipe: A plain version is provided as well as one with a "miniraft", to provide something for the supports to stick to.
Wheels: The wheel model has a miniraft. Be sure to add supports.
Seat and steering wheel: Best to print these with a brim.
Everything else is pretty simple and straightforward to print, with minimal or no supports/rafts/brims.
Smoothing
This car was smoothed with 3d printing resin and baby powder. You can find videos and guides online that describe the process, but here it is in a nutshell:
Depending on the infill you use, you should be able to add tungsten weights to the holes in the rear of the body. If you plan well, you can maximize the weights and still end up right at 5 oz. I haven't raced this design, but it seems like it could be pretty fast if you put some effort into it.