This is a HueForge Filamanet paining using the follwing settings.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA PolyTerra Lavender Purple Transmission Distance: 0.5
PLA PolyTerra Arctic Teal Transmission Distance: 0.5
PLA PolyTerra Cotton White Transmission Distance: 2.5

Swap Instructions:
Start with Charcoal Black
At layer #11 (0.96mm) swap to Lavender Purple
At layer #13 (1.12mm) swap to Arctic Teal
At layer #15 (1.28mm) swap to Cotton White for the rest.