secret keeper hidden drawer 1.1

I saw this as a wood project on youtube, but they didn't show the internals and so I had to go about figuring it out and the best way to do that was in CAD. It actually printed up pretty well, and works cool. what happens is it looks like a simple cabinet with a pull out drawer where the drawer also has a lid That should be the tip-off that something is amiss, but so long as the user doesn't question that most likely they will also dismiss the fact that the drawer itself is not quite the correct depth for the size of the cabinet. playing with the box nothing will seem out of the ordinary, and its only minorly strange that you can't pull the drawer completely out. That is unless you know the trick.
If after you take off the lid and then push the drawer all the way back in, you are now able to slide the top to the left, so that the groove that the lid of the first box was riding in aligns with the lid of the second secret box can you then pull out the drawer the full width exposing the second hidden compartment. If you don't do it in exactly in that way, in that order, the top of the box seems to be incapable of moving and there is no way to get to the second hidden box.

I will probably design a 2.0 where the hidden catch is on the bottom instead of the lid and make the whole thing big enough so that the cabinet and drawer will be a monitor stand where you have the front pencil drawer and the hidden secret drawer in the back when you slide over the top.