AMS Cardboard Spool Adapter JAYO Remixed by ebjspecials

Remixed by

ebjspecials

3D Printer>3D Printer Accessories

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

200,8mm, 0.2mm layer, 3 walls, 10% infill

Designer

4.2 h

2 plates

4.2(5)

0.2mm, 3 walls, 10% infill, lastest v3.2.2

Designer

4.1 h

2 plates

5.0(1)

Boost

Released

Description

Hello Makerworld Community,
this is a remix of the Cardboard Spool Adapter by "bigdog7".

Changes/Improvements from my old v3.2.1 to this one v3.2.2:
1. Coil diameter tapered to 53.4mm for Meta Spools
2. Holes added to the spool to attach the filament
3. Added a 4-way fixation so that the cardboard spool can no longer slip through. An 8-fold fixation is also available. (Please note that you have to rotate the fixation by 22.5 degrees if you don't use my printer profile)
4. All parts of the 3mf attached as RAW files to be able to create your own remix

5. A 3mm edge added to the outside of the spool for more running surface on the AMS reels

Please use the current version: v3.2.2
Last change: outer Diameter reduced to less than 200mm, inner Diameter reduced to 53,4mm for Meta Spools

Hallo Makerworld Community,

dies ist ein Remix des Cardboard Spool Adapters von "bigdog7".

Veränderungen/Verbesserungen:

1. Spulendurchmesser verjüngt auf 53,4mm für Meta Filamentspulen
2. Löcher hinzugefügt zur Spule um das Filament zu befestigen
3. Einen 4-fach Fixierung hinzugefügt damit die Pappspule nicht mehr durchrutschen kann. Eine 8-fach Fixierung ist auch verfügbar. (Bitte beachten dass ihr die Fixierung um 22,5 Grad drehen müsst falls ihr nicht mein Druckerprofil nutzt)
4. Alle Teile der 3mf als RAW Dateien angefügt um seinen eigenen Remix gestalten zu können

5. Einen 3mm Rand hinzugefügt zur Aussenseite der Spule für mehr Lauffläche auf den AMS Rollen

Comment & Rating (12)

@der.3ddruckfan

Print Profile

200,8mm, 0.2mm layer, 3 walls, 10% infill

einfach und gut zu Drucken. Danke für dieses Design.

@E_T_

Print Profile

0.2mm, 3 walls, 10% infill, lastest v3.2.2

Printed 4 of these, my cardboard AMS troubles are a thing of the past! Thanks!

@gassenmaier

Boosted

Print Profile

200,8mm, 0.2mm layer, 3 walls, 10% infill

Funktioniert gut

The designer has replied

@ebjspecials

Danke für die Rückmeldung.

@urzulus

I printed it and found the interior ring was too large for Jayo Meta spools. Needs to be 53m with fixations that take up play.

The designer has replied

@ebjspecials

Hi. Ok. I make a new one for Meta Spools, but i ill and need a little Time to regenarate.

@makeareflexsave

It prevents the lid of the AMS from closing so I don't know what the point of this is

The designer has replied

@ebjspecials

Many others make the original by bigdog7 and my old Version and never Comment that it is to big. Most of over 6k Downloaded Spool Adapters have 200,8, 200,11 or 200,2mm an work. I prever to open the 3mf and change the Diameter of the Object "Spool Adapter_v3.2_Ring_202mm" to 201mm or 200,8mm and place it middle at the Printplate. Thank you for the advice. I will upload another Version with 200,8mm.

(Edited)

@snake045

Print Profile

200,8mm, 0.2mm layer, 3 walls, 10% infill

nice print

@bodosg

Print Profile

200,8mm, 0.2mm layer, 3 walls, 10% infill

Bei mir haben sie nicht 100% gepasst aber mit einer sehr kleinen Bearbeitung an der Papprolle ging es sehr gut.

@1Bueffel

Print Profile

200,8mm, 0.2mm layer, 3 walls, 10% infill

Strength Issue

The designer has replied

@ebjspecials

The model is also designed to be simple and light so that it can be easily moved on the AMS wheels. With the predecessor, which has over a thousand downloads, not one person complained about the strength.

No more