Brembo Coaster Set *Improved* by Scattered Collectables

Scattered Collectables

Hobby & DIY>Vehicles

Print Profile(4)

All

P1P

P1S

X1 Carbon

X1E

A1 mini

0.2mm layer, 3 walls, 15% infill

Designer

6.8 h

4 plates

4.9(54)

Optimized print modified design

5.9 h

3 plates

4.9(9)

0.2mm layer, 3 walls, 15% infill

5.2 h

2 plates

5.0(6)

All printers, 0.2mm layer, 3 walls, 15% infill

3.8 h

3 plates

4.8(6)

Boost

292

458

1 k

1.1 k

Released

Description

The New and improved version of my printable Brembo coaster set, which i originally designed in June 2022

for rights to sell prints visit https://www.patreon.com/ScatteredCollectables

- Improved overhangs for better print quality

- Better fitment of the coasters so they don't lean

- A more accurate logo

- Added drain holes for any liquid to escape

- New Coaster piece with no hole, as requested

Assembly is easy, just print all of the pieces, and glue the 4 printable bolts into the holes, or use M4 bolts for a more authentic look.

I have also added STL files for a Caliper which is blank, and two separate logos which can be printed in multicolour if you wish to make the Brembo words a different colour like seen here in this picture below

Comment & Rating (96)

@_hsb_

Print Profile

0.2mm layer, 3 walls, 15% infill

Thanks for a cool design. I made some modifications to the caliper and the disc and changed some settings for a nicer finish. See the updated print profile "optimised print modified design"

(Edited)

@3DRicks

how is ist possible to get a clean finish with this design? The white brembo logo should be flush with the rest to get a clean look.

@_hsb_

Replying to @3DRicks :

Did you use the "Optimised print modified design" profile? Looks like you have too big nozzle or changed some settings.

@3DRicks

Replying to @_hsb_ :

yes i used the print profile and didn't changed any of the settings, and 0.4mm nozzle is also not too big.

@user_1160714155

Nice model, print went well

@Phizy

How does it look carbon?

@Nwalters94

Print Profile

Optimized print modified design

love it!

@streethobbies

Print Profile

0.2mm layer, 3 walls, 15% infill

Printed great. Made a few changes to the profile to print on the mini and went nice and slow on the outer walls for that nice silk shine.

@user_3384297878

Print Profile

All printers, 0.2mm layer, 3 walls, 15% infill

really cool design, love brembo.

@Luca566

Print Profile

Optimized print modified design

Top

(Edited)

@Luca566

Print Profile

0.2mm layer, 3 walls, 15% infill

Top

@ESPN8_TheOcho

Print Profile

0.2mm layer, 3 walls, 15% infill

looks great. I printed .16 layers at slow speeds (for bambu), used abs filament and forgot I had the purge tower disabled so here is a perfectly nice model with a horrible streak. I'll be re printing this again. thanks

@SD_Studios

Print Profile

0.2mm layer, 3 walls, 15% infill

Very easy to print as it was setup on the different plates!!

@SD_Studios

Printed these in PLA and they came out beautifully

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Print Profile(4)

Description

Comment & Rating (96)

License

Related Models

Fallout Coaster Set

Taylor Swift Coaster Set

Fallout Coaster Set

Funny Dog Coaster / Doctor / Vet / Coffee