AMS Lite compatible Filament spool adapter 72mm to 52mm (Sunlu Spools) by eds_3d_shop

eds_3d_shop

3D Printer>3D Printer Accessories

Print Profile(4)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

2x (variable layer height) 0.2mm layer, 2 walls, 15%infill

Designer

1.2 h

1 plate

4.8(9)

4x (variable layer height) 0.2mm layer, 2 walls, 15%infill

Designer

2.4 h

1 plate

4.7(3)

for A1mini, 2x (variable layer height) 0.2mm, 2 walls, 15%infill

Designer

1.4 h

1 plate

5.0(2)

for A1mini, 3x (variable layer height) 0.2mm, 2 walls, 15%infill

Designer

2 h

1 plate

5.0(1)

Boost

182

161

Released

Description

Working on such designs takes a lot of time and if you like my work and want to support me - please print my “Designer” printprofiles! It will help me to design more! Thank you in advance!🙏

Filament spool adapter 72mm to 52mm - its perfect for AMS Lite and not only - you can use it for external spoolholder etc..

Filament spool adapter for the spools with the 72mm hole to the standard 52mm.

Many filament spools (e.g. from Sunlu) have a larger center hole and will not fit the "standard" spool holders that expect a smaller hole - see photos for an example.

This adapter is printed quickly and sits perfectly tight in such spools.

Print settings: 2 walls, PLA/PETG.. no supports

---------------------------------------- DE ---------------------------------------------

Filamentspulenadapter für die Spulen mit dem 72-mm-Loch auf das Standard-52-mm-Loch - perfect für AMS Lite und nicht nur!

Viele Filamentspulen (z.B. von Sunlu) haben einen größeren Loch in der Mitte und passen nicht auf die "Standard" -Spulenhalter, die einen kleineren Loch erwarten - siehe Fotos für ein Beispiel.

Dieser Adapter ist schnell gedruckt und sitzt in solchen Spulen perfekt dicht drin.

Druckenstellungen: 2 Perimeter, PLA/PETG, keine Supports notwendig.

— ! —

Thanks for downloading, rating in advance and please don't forget to like this model! ;-)

Take a look at my another very helpful designs for X1/P1P/P1S/A1/A1mini:

🔗**Eds_3D_Shop designs on MakerWorld** 🔗

If you like my work and want to support me - please follow me and if you want - you can buy me a coffee! https://linktr.ee/eds_3d_shop

Thank you for your support and.. happy printing!

Ed ;-)

Comment & Rating (23)

@user_2666247359

Print Profile

2x (variable layer height) 0.2mm layer, 2 walls, 15%infill

Works great.

The designer has replied

@eds_3d_shop

🤩👍Thank you for awesome feedback and rating ! 🙏😍👍 Happy printing and feel free to check my another BambuLab designs! 🖐️😃

(Edited)

@ReidSkelton

Print Profile

for A1mini, 3x (variable layer height) 0.2mm, 2 walls, 15%infill

works great for my pesky large filament spools

(Edited)

The designer has replied

@eds_3d_shop

I’m really happy to hear that! Thanks for great feedback! 😍👍🙏

@3DUrbanArts

Print Profile

4x (variable layer height) 0.2mm layer, 2 walls, 15%infill

attenzione alle dimensioni!!

The designer has replied

@eds_3d_shop

Thank you 🙏😍👍

@campbjac

Worked perfectly to adapt Sunlu Shiny Silk PLA to the AMS for my A1 mini.

The designer has replied

@eds_3d_shop

Sounds cool! Thank you for great feedback! 🙏😍👍

@UmbrellaCorp

Print Profile

2x (variable layer height) 0.2mm layer, 2 walls, 15%infill

Works fine

(Edited)

@Tom_Griffin

Print Profile

for A1mini, 2x (variable layer height) 0.2mm, 2 walls, 15%infill

fits really well, works a treat

@Billrobland

Print Profile

4x (variable layer height) 0.2mm layer, 2 walls, 15%infill

The designer has replied

@eds_3d_shop

Thank you for great rating! 🙏😍👍 Happy printing and feel free to check my another BambuLab designs! 🖐️😃

@VeqasZ

Print Profile

2x (variable layer height) 0.2mm layer, 2 walls, 15%infill

Passt perfekt!👌

@alonzo.roger

Print Profile

for A1mini, 2x (variable layer height) 0.2mm, 2 walls, 15%infill

These worked perfectly for my Sunlu filament spools on the AMS Lite. Thank you so much.

@campbjac

Print Profile

2x (variable layer height) 0.2mm layer, 2 walls, 15%infill

I've printed 4 of these to use with Sunlu Silk PLA on my A1 mini's AMS Lite. Works perfectly.

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Print Profile(4)

Description

Filament spool adapter 72mm to 52mm - its perfect for AMS Lite and not only - you can use it for external spoolholder etc..

Filamentspulenadapter für die Spulen mit dem 72-mm-Loch auf das Standard-52-mm-Loch - perfect für AMS Lite und nicht nur!

Take a look at my another very helpful designs for X1/P1P/P1S/A1/A1mini:

Comment & Rating (23)

License

Related Models

Sunlu Spool AMS Lite adapter

Spool adapter for AMS Lite

Perfect Filament Clip

Sunlu Snap-on Leftover Filament Indicator-1kg roll