[BaBo] Labeled insert Boxes. 1x1 and 1x2 by Wickieprints

Wickieprints

Tools>Hand Tools

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 3 walls, 20% infill

Designer

22.7 h

4 plates

4.7(10)

Boost

188

119

Released

Description

I made these insert boxes to add to your BaBo system. I made these boxes with a round inside so you can easily acces your small part.

I also made a small adjustable inlay you can put in the top of your box. In that way you can always remove the “label” adjust it and replace it. So if you wanne store something else in it you don't have to print a whole other box.

I made it from 1X1 to 1x7 and 2x1 to 2x7,

The plates in uploaded are all the files i have. Add a plate en drag what you want to that plate. Super easy. Hope you enjoy it.

You can sell our designs we made and are available on our makerworld page. Wit a small sub on our Patreon you get a commercial license to sell and back our non profit founding for Children with special needs: https://www.patreon.com/wickieprints/posts

Comment & Rating (28)

@platini76

hello, can you make more deep and more smooth ? they have much waste space on bottom, and are not smooth...

The designer has replied

@NickR1983

If i let it down more then the bottom would disappear. So no, it's not possible to make it a round inside without loosing some space. and about those layers. Mine did'nt had them that much. Maybe a Variabel layer is your solution.

@platini76

Replying to @NickR1983 :

before base there are about 8-9mm you can recover on the base about 3-4 mmm without reduce stability..

@NickR1983

Replying to @platini76 :

you can try my Babo drawer system download. I made another case overthere. But in the end this is what it is. Not gonna change it at the moment.

@mopedimus

Print Profile

0.2mm layer, 3 walls, 20% infill

This print is honestly average. What it has going for it is ample space for screws. I also liked the concept of the labelplates. The number of color layers and wall thicknesses as profiled left me worried it will eventually break.

@Garcy99

Print Profile

0.2mm layer, 3 walls, 20% infill

Bottom could be less rounded to get more space, but overall it's great

@SwissK

Thank you for your model. Before I print, I like to make some more labels. Could you provide me the Text Settings?

The designer has replied

@NickR1983

Label is 29x6 and 2 mm thick Text is in Serif

@SwissK

Replying to @NickR1983 :

Thank you

@platini76

could you please say which font did you use and size?

The designer has replied

@NickR1983

Thought i already did. Sorry fot that. Label is 29x6 and 2 mm thick Text is in Serif

@platini76

Replying to @NickR1983 :

thanks!

@platini76

hello can I have also M3X4 or know the character you used, measure and how many mm is infilled?

The designer has replied

@NickR1983

if im right i uploaded a solid label to as well that, you can edit that one as you like.

@platini76

yes but can I know which font you used and dimension, and dept ? to make the others identical?

@Deliveryhell

I suggest to the creator to make a plate of just 1x1 bins for people to use also labeling plates to be more understandable when try to prin them in a rush before work so when they get home they are like well crud I printed a bunch of bins I didn't want

The designer has replied

@NickR1983

Well so you dont have the time to organzie what you want but i need to give up my whole day to organize stuff? Is it not enough that i already make stuff that is free to download?