These ratchet organizers allow you to keep your toolbox tidy. I use them for ICON ratchets, but low-profile ratchets from other brands should work. The main dimension to check is head thickness:

• 1/4": ≤11mm
• 3/8": ≤16mm
• 1/2": ≤18mm

Multiple can be spaced apart with the included self locking clips (clips are meant to be spacers, not structural, so don't string 10 together, fling them around and wonder why the clip broke).

Accommodates 10mm x 5mm magnets (2 per holder), which seems to be sweet spot for firmly holding in place with standard toolbox liner. Magnets are intended to be a tight fit when pressing them in so they don't need to be glued (smaller magnets could of course be used with glue).

I've always printed with 0.4 nozzle and 0.2 mm layer height. Tolerances for clips and magnets are fairly tight, so larger nozzles/layer heights may work, but I haven't personally tried it.

Does not require supports or brims. Have printed multiple times without issue on Cool Plate (without glue) as well as Textured Plate with grid infill (there should be no reason gyroid or anything else wouldn't work).