VEK3D Iron Man MK 46 Helmet by VEK_3D

VEK_3D

Props & Cosplays>Masks & Helmets

Print Profile(3)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 2 walls, 15% infill

27 h

5 plates

4.7(94)

0.2mm layer, 3 walls, 15% infill

29.8 h

4 plates

4.6(7)

0.2mm layer, 2 walls, 15% infill

1.5 h

1 plate

Boost

397

731

169

1.6 k

2.2 k

Released

Description

*ATTACHED IS A LINK DIRECTLY TO THE FILES IN STL FORMAT

Ironman Mark 46/47 Helmet 3D Printable Model. This was modeled using CGI reference for great exterior accuracy.

These 3D models have been been test printed before uploading in order to ensure 100% quality guarantee.

There is a custom license included with the file that is subject to change if necessary. I'd love to see what you make so feel free to share the finished product with me

Uses 10mm by 2mm magnets

captain america cicil war

avengers

Comment & Rating (169)

@jsvojtka

Print Profile

0.2mm layer, 2 walls, 15% infill

Absolutly best helmet I have printed! 🤩

(Edited)

@HoneyCoCo

Hello, the quality and glossiness of your model are very good. What brand of consumables do you use? I don't think pla basic has that effect. Is that silk?

@jsvojtka

Replying to @HoneyCoCo :

you can see it on photos 😁

@HoneyCoCo

Replying to @jsvojtka :

oh thank you so much!

(Edited)

@JeremiahFitz

I had no major issues with the profile for this build. only had to make some small orientation adjustments for some of the smaller pieces. otherwise awesome job and great designer!

@HoneyCoCo

This is great. Do you use pla silk? Which brand of consumables is it?

@JeremiahFitz

Replying to @HoneyCoCo :

yeah I used Esun Silk PLA. Red, metallic silver and gold

@tripahermann

Replying to @JeremiahFitz :

I have a question on the main piece of the helmet the tabs that had magnet holes on them broke off any ideas on how to fix this

@hzielinski

Print Profile

0.2mm layer, 2 walls, 15% infill

Really good file. love the modularit. my only issue was the magnet holes were too small in diameter to fit the 10mm magnets I got which actually measure 9.97 mm so had to widen the holes with a soldering gun. a little messy but worked out. first helmet I’ve ever done and was for my son’s birthday. he loved it.

@DenoD

Love the eyes and the stand, can you share the str or any information on the eyes? Would appreciate it!

@hzielinski

Replying to @DenoD :

eyes I got off of Amazon. https://a.co/d/57f2JXT and the stand is in Maker World as Simple Helmet stand.

(Edited)

@DenoD

Replying to @hzielinski :

thank you very much!!

@Yedoggie

Print Profile

0.2mm layer, 2 walls, 15% infill

great print file. I slowed the print down to silent or 50 percent to get a better finish on the cheek and eye pieces and same on the helmet portion because supports collapse on first try.

@stevecandy1982

I had supports collapse on the helmet too, what would you recommend in your opinion as I don't have access to a laptop at the moment?

@Alexkurz86

Replying to @stevecandy1982 :

I’d change the tree setting to strong and just in case use glue for the bed. I guess this does a lot.

@user_3645444190

i had my tree supports fail 30 hours into the 35 hour print of the large helmet piece too....About to give up trying to print these helmets.

(Edited)

@viktorkraemer

awesome designer!

@DenoD

Wow! Love the stand and the lights! Could you please share those?

@P1S3dPhoenix

Print Profile

0.2mm layer, 3 walls, 15% infill

Worked beautifully!

The designer has replied

@DenoD

thanks!

@shanehoggatt

Print Profile

0.2mm layer, 3 walls, 15% infill

first part printed great , just need some red now :)

The designer has replied

@DenoD

Nice!!

@DenoD

Looks great so far!

@holojumper

Print came out great just need to add the led eyes and finesse some of the joints as I went a bit crazy with the paint

@user_3645444190

can I ask what brand/color paint was used?

@holojumper

Replying to @user_3645444190 :

Maston - metallic gold Colour it - gloss red or Hycote car spray in post office van red (apologies I cant remember which as I also made a spiderman mask at the same time and cant remember which one i painted with which red) The grey is just the primer with a gloss acrylic clear coat All covered in a Maston - Gloss acrylic clear coat. All the paints were bought from 'the range' if you live in the UK. You can probably get all these on Amazon too

@Santi

Print Profile

0.2mm layer, 2 walls, 15% infill

nice Model and easy to print

@Jaybro187

hi what siza magnets did you use. thanks

@Santi

8x2 mm

@placidwave

Print Profile

0.2mm layer, 2 walls, 15% infill

Very nice helmet, it was fun printing it. The parts fit well together, and it's easy to assemble. Used Filament: red: Creality CR-PETG copper: eSun eSilk-PLA bronze: eSun eSilk-PLA

(Edited)