Remember if you sant to scale, do it only with x and y axis, z must be the same as original.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PLA PolyLite Starlight Neptune Transmission Distance: 1
PLA PolyLite Pro Polymaker Teal Transmission Distance: 0.5
PLA PolyTerra Pastel Ice Transmission Distance: 1.6

Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Starlight Neptune
At layer #10 (0.88mm) swap to Polymaker Teal
At layer #16 (1.36mm) swap to Pastel Ice for the rest.