Reusable Activated Carbon Box (For X1C and P1S)
Copyright Claim
Reusable Activated Carbon Box (For X1C and P1S)
Boost
72
182
19
Print Profile(3)
High strength, ABS/ASA, 0.2mm
Designer
1 h
1 plate
Removal Tool, ASA/ABS, 0.2mm
Designer
28 min
1 plate
PETG, 0.2mm layer, 6 walls, 25% infill
1.5 h
1 plate
Boost
72
182
19
0
133
65
Released
Description
Simple and fast print that allows you to use your Nevermore Activated Carbon in Bambu Lab printers
INSTRUCTIONS
- Use PETG, ASA, ABS or other temperature resistant filament - PLA will probably not survive
- For assembly, all you need is 9 standard 6x3 magnets (10 if you want to print the box removal tool)
- There is a 0.25mm tolerance for the magnet holes, use super glue to glue them in place
- Always use legit Nevermore branded carbon pallets
My Twitter :)
In case you have any requests, feel free to send me a message and I will try to help you out!
Comment & Rating (19)
All
Print Profile
High strength, ABS/ASA, 0.2mm
Nice fitting canister, only had 4mm magnets but a bit of superglue works wonders
0
Reply
Print Profile
Removal Tool, ASA/ABS, 0.2mm
great little add-on
0
Reply
Print Profile
PETG, 0.2mm layer, 6 walls, 25% infill
bit tight but fits. thanks
0
Reply
nice print. thanks
0
Reply
Print Profile
High strength, ABS/ASA, 0.2mm
The designer has replied
1
Reply
Thanks for sharing!
0
Reply
Print Profile
Removal Tool, ASA/ABS, 0.2mm
1
Reply
Print Profile
High strength, ABS/ASA, 0.2mm
Printed well in ASA. Only glued the magnets wrongly of course.... ;)
0
Reply
Print Profile
High strength, ABS/ASA, 0.2mm
1
Reply
Print Profile
High strength, ABS/ASA, 0.2mm
0
Reply
Print Profile
PETG, 0.2mm layer, 6 walls, 25% infill
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
© 2024 MakerWorld