Bambu Lab Reusable Spool / MasterSpool by Print4Gods

Print4Gods

3D Printer>3D Printer Parts

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 6 walls, 25% infill

Designer

6.4 h

2 plates

4.7(13)

0.16mm layer, 2 walls, 15% infill

Designer

5.3 h

2 plates

5.0(6)

Boost

189

221

Released

Description

My Design of A MasterSpool for the BambuLab AMS

no Supports

Comment & Rating (21)

@user_1259705704

Print Profile

0.16mm layer, 2 walls, 15% infill

default settings. great print. definitely recommend.

(Edited)

@denjacengineeri

Print Profile

0.2mm layer, 6 walls, 25% infill

Used Bambu Labs very own PLA and the end result was very impressive. Used the cool plate and allowed the printer to use the default settings for a 0.4mm nozzle.

@HerrTankwart

Boosted

Print Profile

0.2mm layer, 6 walls, 25% infill

Worked as intended.

@HerrTankwart

Boosted

Reduce to the max! Light, fast and solid print in PETG.

(Edited)

@kimmy326

I had problems with this spool. I decided to try and print this one since it uses less filament and doesn't take as long to print. However, when I put this into the AMS to use it, the filament kept catching on one of the spiked areas/points. I am not sure if it is an issue with the way the filament is wound or something else. I am going to give it another try again with different filament and see how it works.

@EAther3D

Print Profile

0.2mm layer, 6 walls, 25% infill

best spool I've printed!

(Edited)

@user_2287991673

Print Profile

0.2mm layer, 6 walls, 25% infill

awesome thank you

@gregchwelos

Boosted

Print Profile

0.2mm layer, 6 walls, 25% infill

OMG I love this design. So light, yet strong and easy to hold. But the best part is the slots for the filament end...doesn't require the filament to bend/kink at all and super easy to insert. Brilliant! I printed 8 of these and filled them w refill spools.