The best solution to fix problems with the original nozzle wiper.
EDIT 06/12/23 - I have reuploaded a 2mm and a 3mm version, as I seem to have messed them up when first uploaded. Please use correct thickness Silicone.
The standard nozzle wiper worked most of the time but after this mod, it works every time!
I wanted to add a silicone sheet to the wiper but also retain the stock wiper.
I recommend printing in ABS or PETG so it withstands high chamber temperatures.
Instructions (Based on 2mm version)
And that's it! Enjoy a clean nozzle with every print.
Please note printed picture is of previous Version
You can buy silicone sheets from the link below. Please make sure to select 2mm!!
https://s.click.aliexpress.com/e/_EJsVoMd