Summary:
A print to temporarily bind things together. You can either insert it into position, like a traditional clip, or roll them into position. Also doubles as a finger massager.
Bill of Materials (100% 3D Printed)
- Raw Materials
- Parts (that need to be printed)
- 1 x tongs.step
- 0.2 layer, 15% infill (cubic), supports (tree or normal), any pla at default
- 2 x c_clip.step
- 0.2 layer, 15% infill (cubic), no supports, any pla at default
- 2 x skewer_roller.step
- View printing profile for settings
Assembly
- Skewer roller (blue) is inserted in each axle of the tongs (red), with chamfered side facing out.
- Attach c_clip (yellow) to the thinner part of each axle (red), near the end of the axle, with tab facing outward. This should prevent the rollers (blue) from sliding out.
- Done!
Roller design inspired by this thing: