Dessicant box for cereal container filament dry box
Remixed by
Copyright Claim
Dessicant box for cereal container filament dry box
Remixed by
Boost
10
46
21
Print Profile(2)
0.2mm layer, 4 walls, 40% infill
Designer
1.2 h
1 plate
0.2mm layer, 2 walls, 15% infill
1.2 h
1 plate
Boost
10
46
21
0
96
123
Released
Description
I loved Humebeam's dessicant box design for his AMS Hydra Mod and adapted it for cereal container dry boxes. As with the original I HIGHLY recommend using a M3 socked head bolt from 6-10mm long to pin the lid in place, the dessicant beads go all over the place easily if they get out. No supports needed, bridging should work fine. I printed mine in ABS but anything should work.
Comment & Rating (21)
All
you only put the container for the silica, where can I find the rest of the components for the complete dry box? thank you
The designer has replied
0
Reply
The base is here, but I use a negative space in Bambu Studio to cut off the dessicant box section in favor of mine: https://www.builditmakeit.com/projects/3d-filament-drybox
The nut for the PTFE fitting is here: https://www.printables.com/model/560631-cereal-box-pneumatic-ptfe-fitting-nut
0
Reply
Replying to @sprior
any chance you could post that remix since I'm using the same rollers but the dessicant box has been a nightmare. I spent most of last night cleaning out beads from my printer room floor because one of the containers opened and fell :( so I would gladly reprint all my sets of roller assemblies to avoid that... althought thinking about it I could probably do some kind of cutter job on them and remove the dessicant box since the bridge between the rollers and the box is very thin... might do that but strill if you could post your remix it would be awesome for future use
0
Reply
Replying to @ice_mouton
Here's how you cut it off: https://help.prusa3d.com/article/negative-volume_238503
0
Reply
Love this box! Can you possibly share what the “wheels” are that you’re using in the cereal box that your spool sits on?
The designer has replied
0
Reply
The base is here, but I use a negative space in Bambu Studio to cut off the dessicant box section in favor of mine: https://www.builditmakeit.com/projects/3d-filament-drybox
1
Reply
Replying to @sprior
Thanks!!
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
I’ve printed several
of these. Excellent fit.
Thank you
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Simple print. Allows me to ad a few extra containers to the box to keep filament dry.
0
Reply
Anyone Have A Link To The Rollers In The Pictures?
0
Reply
Print Profile
0.2mm layer, 4 walls, 40% infill
Turned Out Great!! Thanks Again!!
0
Reply
Print Profile
0.2mm layer, 4 walls, 40% infill
0
Reply
Print Profile
0.2mm layer, 4 walls, 40% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 4 walls, 40% infill
0
Reply
This remix is based on
License
This work is licensed under a
Creative Commons Attribution-NoncommercialRemixes (1)
© 2024 MakerWorld