This is a holder to mount an AstroAI DM6000AR multimeter to an Ikea Skadis style pegboard.

Whilst it's designed for the DM6000AR, it should take any multimeter which is 85.5 x 38mm or smaller.

This item is the part which holds the multimeter itself, and I have used my small Skadis pot design (also pictured here) to hold the cables next to it.

This works using my Ikea Skadis clip design which just slot through holes in the back ready to hook on.

The .3mf files I've uploaded include the clips as well as the holder itself, and I've also included the clips as a separate stl if you wanted to print extras.

You may want to just pop a drop of glue onto the clips when inserting them into the mount (and allowing to dry before fitting to the board) just to hold them in place better when doing so.

I hope you enjoy printing and using my design. To help me keep designing and uploading more things, you can tip me via 'Buy Me a Coffee' here: https://www.buymeacoffee.com/JoshForwood

If you're after other Skadis mounts, I've made a collection of my Ikea SKÅDIS designs here.