eSUN AMS Spool Adapter by bennny

bennny

3D Printer>3D Printer Accessories

Print Profile(2)

All

P1P

P1S

X1 Carbon

X1E

0.24mm layer, 2 walls, 15% infill

Designer

17 min

1 plate

4.4(81)

0.2mm layer, 6 walls, 25% infill Bambu Basic PETG

30 min

1 plate

4.8(9)

Boost

192

114

765

1.2 k

Released

Description

I designed this Spool Adapter for the Bambu Lab AMS for my eSUN cardboard spools, since none of the other adapters currently available fit it properly. This design utilizes the holes of the carboard spools to help lock the adapter in place as well as an anti-slip lip at the top (prints without supports) that will prevent the adapter from coming loose inside the AMS. I exported this as a high quality STL and as a result the curves on the outside have no flat edges and will spin easily inside the AMS. The model only uses 8g of filament.

If you have issues with fitting please let me know in the comments. It's possible eSUN cardboard spools are different between types and I cannot realistically test every spool. If it works for you, please let me know in the comments what type of eSUN filament your cardboard spool is for.

Check out my other cardboard spool adapters!

PolyMaker
Eryone
Overture
JAYO
SUNLU
Inland (coming soon!)
PolyTerra (coming soon!)
Duramic (coming soon!)

Comment & Rating (114)

@kerem.oezdemir9

Print Profile

0.24mm layer, 2 walls, 15% infill

taugt nichts, trotz optimaler Einstellungen, fällt das Dong auseinander

@kerem.oezdemir9

Replying to @bennny :

i did, dont worry. i know how to print

@Mr_Monaco_22

Nice print, fits well.

@bing

Print Profile

0.24mm layer, 2 walls, 15% infill

printed well in pla and fit the esun spool perfectly. layers did separate when trying to remove it from the spool tho.

@JBFUK

Will the AMS lid close with this adapter?

The designer has replied

@bennny

Yes it will, I’m running a print in my AMS right now with an eSun spool and the adapter inside. (it’s the one with the red adapter)

@JBFUK

Replying to @bennny :

You must be lucky, doesn't work fo rme with a new AMS - the spool is too tall so lid cannot be closed. Don't want to raise the lid so I'll have to respool by the look of it.

@bennny

Replying to @JBFUK :

how weird, according to the AMS dimensions it should fit. sorry for your troubles

@oobond

Nice upload, thank you, works perfectly, not sure what "northernSG007" was doing, most likely used the incorrect system settings!

The designer has replied

@bennny

thank you for the kind comment, would you mind rating 5 stars so you can offset his 1 star rating?

@Northern.SG

Print Profile

0.24mm layer, 2 walls, 15% infill

failed twice in a row. not sure why, would not try this again.

The designer has replied

@Northern.SG

well. at least I could rate it 1/5. better than the 0/5 it should have.

@Chiefkiller

dont know what this guy is talking about, Ive printed it twice in PETG without any issues.

(Edited)

@Northern.SG

Replying to @Chiefkiller :

way to go!!! amazing job!

@oobond

Print Profile

0.24mm layer, 2 walls, 15% infill

Excellent works perfectly :)

The designer has replied

@bennny

thanks!

@jan.litzinger

Printed two adapters, one with Bambulab PLA Tough, one with Tinmorry PLA. The first one is slightly too big, the second one fits perfectly. Seems to be depended on the filament, nothing a drop of super glue cannot fix ;-) Used the original settings of the creator on an X1C. One question though: Why not use the "lock" on both sides? Would make it even more stable, wouldn't it?

(Edited)

The designer has replied

@bennny

it would be more stable, but then you wouldn’t be able to use the holes to hold your filament. I’ve found just the single pair of holes is enough to keep it on.

@jan.litzinger

Replying to @bennny :

Yeah, you are right - I did not thought about this.

@Gopirque

Print Profile

0.24mm layer, 2 walls, 15% infill

a few corners seemed thin and separated when I removed from the build plate, but still functioned for my rolls. quick print but likely a one time use per roll.

@Gopirque

Replying to @bennny :

100% agree, that was my problem with the first one I printed ;). second one was a little better but still started separating when I put it on the roll….right by the knobs that fit into the esun holes.

@Chiefkiller

Print Profile

0.24mm layer, 2 walls, 15% infill

Printed great in PETG, fits the esun nicely. I used superglue to stick it to the cardboard.

The designer has replied

@bennny

thanks!

(Edited)

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Print Profile(2)

Description

Comment & Rating (114)

License

Related Models

ESUN PLA AMS spool cardboard adapter

Esun PLA+ spool drawers

YACSA - Yet Another Cardboard Spool Adapter!

ESUN PETG+HS AMS spool cardboard adapter