The Model

🖨️ The 3D model of big scary lasers warning sign. 🖨️

If you don't have or don't want to install LED's you can just glue the parts together and have an awesome sign!

Materials and tools:
- glue gun
- aluminum tape
- led strip aliexpress is cheapest

- soldering iron (optional)

RECOMMENDATIONS

- use a textured PEI sheet

- use the aluminium tape on the inside of the backplate to help with light diffusion (optional)
- glue the LED's the further away from the coloured design possible; placing them too close ruins the diffusion and the individual LED's become visible, cob LEDS help.

Bambu Studio Settings:
I always recommend using the print profile I provided since it has settings with which I've been able to get the best results.
If you choose not to here are the main slicer settings I recommend:
- preferences (ctrl + P) → activate developer settings → Quality →Advanced → First Layer Flow Ratio: 1.04
- Quality → Wall generator → Arachne
- Quality → Wall transitioning threshold angle → 50º
- Strength → Advanced → Infill/wall overlap → 20%
- Quality → Advanced → Avoid crossing walls
- Increasing retraction / reducing temperature can help reducing wisps
- Order colour printing from lightest to darkest color

I hope you enjoy it!

For all things Laser join the Laser Masterclass facebook group 😊

Cheers

Jay Mac