eSun official cardboard spool adapter from eSun Original by Dreistmann

Dreistmann

3D Printer>3D Printer Accessories

Print Profile(4)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 2 walls, 15% infill

Designer

46 min

1 plate

4.6(252)

PETG, Scaled .25%, 0.2mm layer, 2 walls, 15% infill

50 min

1 plate

5.0(20)

PLA 0.20mm

50 min

1 plate

4.8(17)

0.2mm layer, 2 walls, 15% infill

46 min

1 plate

4.4(12)

Boost

255

548

342

2.3 k

3.7 k

Released

Description

This spool adpater was created by eSun itself for the Cardboard spools, work with old AMS versions

Dont work with SA0001 for this use the Lid raiser

use https://makerworld.com/de/models/33133#profileId-29934 or https://makerworld.com/de/models/24099#profileId-21342

Printed with Pla+ profile from eSun website for X1C

eSun many Printer settings

eSun Store
If you would like to support me use the code Dreist10 u get 10% discount always u get the best price

Comment & Rating (342)

@karl

Printed well, but a bit too small for my eSun ABS+ spoil.

The designer has replied

@Dreistmann

If the rolls are open for longer, they will absorb some moisture and become slightly larger or press it with a little force and not every roll has to be 100% the same scale it a little bit

@karl

Hi! It’s a new roll but yeah, I saw after commenting that both sides of the cardboard spool aren’t exactly the same. Anyway, I’ll shave it a bit and it will work. Thanks!

@19evdominta3

Print Profile

0.2mm layer, 2 walls, 15% infill

All good on the model. (I certainly have some small AMS fit issues, like others, but it is not a fault of the model at all - it adds very litte height)

The designer has replied

@Dreistmann

yes a little bit to high together i used die linked ams riser

@nickwestra15

Print Profile

0.2mm layer, 2 walls, 15% infill

Can't close the lid, but works great.

(Edited)

The designer has replied

@Dreistmann

use the linked ams lid riser

(Edited)

@AvidImprint

Print Profile

PETG, Scaled .25%, 0.2mm layer, 2 walls, 15% infill

perfect fit for the new eSun spool

@user_1328489880

Print Profile

0.2mm layer, 2 walls, 15% infill

sehr schön geworden danke

@torontonathan1

Print Profile

PLA 0.20mm

fit grate

(Edited)

@smithpl

fits perfectly, thanks. Good job

@MHX3DX

Print Profile

0.2mm layer, 2 walls, 15% infill

fits perfectly

@Codyinbody3

Print Profile

0.2mm layer, 2 walls, 15% infill

I printed a good few of these for the new cardboard esun spools and thought they would help them out in the AMS but they slip and slide just as much as the cardboard spools do without them. I’m having better luck with electrical tape on the edges. They do fit nicely around the spool and the idea of these is the only reason I’m giving it 2 stars.

Other Issues:Doesn’t work as advertised/marketed