Swatch Box SOLO
Copyright Claim
Swatch Box SOLO
Boost
174
286
98
Print Profile(2)
Newly Revised r01_Optimized, 0.2mm layer, 2 Colors, NO BRIM
Designer
2 h
1 plate
A1 MINI-SB SOLO r01_0.4mm Nozzle, 0.2mm Layer, Optimized, NO BRIM, 2 Colors
Designer
2.1 h
1 plate
Boost
174
286
98
1
642
407
Released
Description
Capacity: 43 swatches
UPDATE {11.3.23} r01 - Increased width of slots. Print profile updated with current revision.
I needed something a bit lower key then the great swatch displays out there, so decided to create my own that I could store in a drawer or stash without taking up a lot of space. This swatch box is compatible with the swatch style made popular by the Bambu Lab A1 Mini. 3mm x 2mm magnets to secure the lid to the body.
Don't forget the small 3mm x 2mm magnets. You need 16 total. Here's a link below.
Check out the rest of the Swatch Box Series
Swatch Box CANVAS
Swatch Box Canvas (Blank Swatch) by Aesth3tix - MakerWorld
Swatch Box A1
Swatch Box A1 by Aesth3tix - MakerWorld
Swatch Box MAX
Swatch Box Max by Aesth3tix - MakerWorld
Comment & Rating (98)
All
Print Profile
Newly Revised r01_Optimized, 0.2mm layer, 2 Colors, NO BRIM
The model itself is great!! But i didn't realize the profile used a brim until after it was done. Ended up re-printing with the brim turned off and it worked a lot better.
(Edited)
The designer has replied
1
Reply
Thanks for the input! The brim is in place for the users who are prone to warping issues. While I agree it may not always be needed, I wanted to ensure a good print with one shot for the end user. As for the edges, keep a cheap chamfer tool on hand to clean up any remaining material from a brim.
If you wouldn't mind attaching a photo of your make with your print profile that would be great! Giving the end user the option of brim or no brim is a great idea!
(Edited)1
Reply
Replying to @Aesth3tix
ah sorry i did upload a pic of the print but didnt realize makerworld automatically set the thumbnail as your pic instead. fixed!
(Edited)1
Reply
perfection! thank you!
0
Reply
Nice work
The designer has replied
1
Reply
thank you! print looks great!
0
Reply
Print Profile
Newly Revised r01_Optimized, 0.2mm layer, 2 Colors, NO BRIM
Great job
The designer has replied
1
Reply
thanks a ton!
0
Reply
Thank you for the model :)
1
Reply
Print Profile
A1 MINI-SB SOLO r01_0.4mm Nozzle, 0.2mm Layer, Optimized, NO BRIM, 2 Colors
with Jayo Black
1
Reply
Print Profile
A1 MINI-SB SOLO r01_0.4mm Nozzle, 0.2mm Layer, Optimized, NO BRIM, 2 Colors
very nice!!
(Edited)
1
Reply
Print Profile
A1 MINI-SB SOLO r01_0.4mm Nozzle, 0.2mm Layer, Optimized, NO BRIM, 2 Colors
Perfect
1
Reply
Print Profile
A1 MINI-SB SOLO r01_0.4mm Nozzle, 0.2mm Layer, Optimized, NO BRIM, 2 Colors
Great print, would like to see on to hold the A1 mini combo swatches specifically
(Edited)
1
Reply
Turned out great and printed super fast
0
Reply
Print Profile
Newly Revised r01_Optimized, 0.2mm layer, 2 Colors, NO BRIM
beautiful print! super fast great quality model
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-NoDerivativesRelated Models
© 2024 MakerWorld