3d_lizzard

0.2mm layer, 2 walls, 15% infill

eried

cover

2024-01-13_8k2m42ekjysj.jpg

2024-01-13_ep9mdg3url2j.jpg

2024-01-13_rqygg6cjnpgr.jpg

plate_1.webp

plate_1.png

<div><h1>Summary</h1><div><p>I was trying to dissasemble a Gameboy Color clone (GB Boy Colour) and I notice that they used some nasty security screws I did not had a bit for them. </p><p>Logically I printed one, and it worked. Since the part is quite fragile, it was only enough for 2 screws, unscrewing them and screwing them back.</p></div><h1>Print Settings</h1><p class="detail-setting resolution"><strong>Resolution: </strong>                         </p><div><p>0.05</p></div>                                    <pre><code>                                            <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>100</p></div></code></pre><p></p><br><br><p class="detail-setting notes"><strong>Notes: </strong><br></p><div><p>Print pointing UP, with the part that goes to the screwdriver at the bottom. I used normal PLA.</p></div></div>

Gamebit security bit driver for 4 mm screwdriver

Global

Print Profile(1)

Description

Summary

Print Settings

Comment & Rating (1)

License

Related Models

PowerDriver - 2-in-1 HexBit Screwdriver w/ Storage

Screwdriver bits box

1/4 Inch Hex Shank Bit Holder Wall Mountable

Multi Bit Driver