Suspended Star stringart to hang or stand
Boost
15
35
11
Print Profile(2)
0.28mm layer, 2 walls, 7% infill
Designer
3.4 h
1 plate
0.28mm layer, 2 walls, 7% infill
Designer
3.5 h
1 plate
Boost
15
35
11
0
73
40
Released
Description
I'm starting to like suspended models.
This time I took a star and twisted it into itself.
The stringing is in 8 levels and each level is rotated by 22.5 degrees to the last.
I made one version to stand on and one to hang.
In the 3mf file you have the possibility to determine whether you want to print with one color, two colors or even three colors.
It is important that the layer height is set to 0.28mm and the wall generator is set to Arachne.
Please be careful when removing the print from the plate.
Comment & Rating (11)
All
Print Profile
0.28mm layer, 2 walls, 7% infill
Printed beautifully!
Changed the colors up for the holidays!
1
Reply
Print Profile
0.28mm layer, 2 walls, 7% infill
Easy to print with no hassle
1
Reply
Great design and perfectly printed without changes to your settings
1
Reply
Print Profile
0.28mm layer, 2 walls, 7% infill
Turned out great!
1
Reply
Print Profile
0.28mm layer, 2 walls, 7% infill
prints nicely
1
Reply
Print Profile
0.28mm layer, 2 walls, 7% infill
1
Reply
Print Profile
0.28mm layer, 2 walls, 7% infill
1
Reply
Print Profile
0.28mm layer, 2 walls, 7% infill
1
Reply
Print Profile
0.28mm layer, 2 walls, 7% infill
1
Reply
Print Profile
0.28mm layer, 2 walls, 7% infill
1
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld