No Print Profile yet. Add one to earn points.
https://www.youtube.com/watch?v=J7n7l8L3Bx0
from season 1 episode 6 of the Eric Andre Show on adultswim. In addition to the printed parts you will need a fidget spinner ball bearing of size 8mm x 22mm x 7mm. I used this one: https://smile.amazon.com/gp/product/B01JKBUR1Q/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
If for some reason you want other prizes, the OpenSCAD file is included so you can easily change the text of each wedge. To do this, modify the wheel_of_prizes.scad file. All other components should still be compatible as long as you don't mess with the parameters controlling the spindle hole.
Printer:
HICTOP CR10
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
10%
Filament: Hatchbox PLA
Notes:
I haven't yet printed the base since it's so large. I have printed all other parts as well as test pieces of the base spindles to make sure the parts fit and have adequate spacing. The caps may be a little loose, but you can glue them in place once the wheel and ticker are placed on their spindles on the base. If you prefer a tighter fit with no glue you can adjust the cap inner diameters in the OpenSCAD files.