This is a flipper refrigerator magnet I designed in Fusion 360 that prints in 10 minutes, needs no supports, and uses less than five grams of filament. The refrigerator magnet has holes for two 6x3, 8x3, or 10x3 magnets to be glued into the holes. Once glued, this magnet can be flipped with either side up or down and will still hold papers and photos on your refrigerator. There are two logos on the outside of the magnets, one recessed 0.5mm and one extruded 0.5mm. I have also included flipper magnets without a logo in the design files. I have Included my Fusion360 design file if anyone wants to remix the design for different size magnets.

Magnets I used for this design are: https://www.amazon.com/DIYMAG-Magnets-Refrigerator-Neodymium-Whiteboard/dp/B0CDGY4VBM/ref=sr_1_1_sspa?crid=1ACHHRGZAT0DL&keywords=small+magnets+8x3mm&qid=1702178679&sprefix=small+magnets+8x3mm%2Caps%2C100&sr=8-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&psc=1