Introduction

Two years ago, I opened an e-commerce store with some jewelry designs created and printed using a resin printer. This model was one of the pieces that was supposed to be added, but for various reasons, we decided to put the entire project on hold.

So, I decided to revisit and modify it to make it suitable for FDM printing, experimenting with various color combinations.

Info

I created this pendant with an abstract design using a pattern and playing with geometries. During the design process, I aimed for a modern and edgy look, and I like to think it might have a bit of a "cyberpunk" feel.

With FDM printing, you can use multiple colors, making this small piece more interesting. In the photos, you can see some combinations, but, of course, feel free to try it with any other colors.

If you use it at night, I think a nice "FLUO PLA" would look great too!

If you like it, don't forget to leave a like!

Update

I added 2 new shapes while keeping the abstract design that characterizes it.
A circle, making it more like a medallion, and a trapezoid that can be worn with the tip pointing up or down.

Printing Instructions

This model is straightforward to print and doesn't require supports or post-processing stages.

It can be printed with a 0.4mm nozzle and a layer height of 0.2mm, but you might also consider using "adaptive layers."

Printing, using my BambuLab P1P, takes about 20 minutes.

For those who wish, I've also uploaded the pre-colored 3mf file for Bambu Studio.

Let me know if you encounter any problems! If you need help, feel free to ask.