Filament Clip for Bambu Labs Reusable Spool
Copyright Claim
Filament Clip for Bambu Labs Reusable Spool
Boost
39
78
20
Print Profile(4)
40x PLA Clips, 0.2mm layer, 2 walls, 15% infill
Designer
6.2 h
1 plate
1x ABS Clip, 0.2mm layer, 2 walls, 15% infill
Designer
16 min
1 plate
1x PLA Clip, 0.2mm layer, 2 walls, 15% infill
Designer
17 min
1 plate
40x ABS Clips, 0.2mm layer, 2 walls, 15% infill
Designer
6.2 h
1 plate
Boost
39
78
20
0
155
133
Released
Description
This storage clip snaps onto the OEM reusable spool, preventing tangling of the filament while in storage.
Thread the filament through the clip, and attach it to the rim of the spool.
For best results, snap onto the pairs of holes around the rim of the reusable spool.
Remove before using spool for printing.
Designed on free Fusion 360.
This is not an official product from BBL, but personally and individually designed for an official product from BBL.
Comment & Rating (20)
All
Print Profile
1x PLA Clip, 0.2mm layer, 2 walls, 15% infill
works great! making one in every color
1
Reply
Print Profile
1x PLA Clip, 0.2mm layer, 2 walls, 15% infill
Good!
1
Reply
Print Profile
1x PLA Clip, 0.2mm layer, 2 walls, 15% infill
Prints perfekt.
Works perfekt.
Perfekt!
1
Reply
Print Profile
1x PLA Clip, 0.2mm layer, 2 walls, 15% infill
These are the only filament clips that I use.
Printed in PLA for PLA, and ABS for those filaments that require drying.
1
Reply
Print Profile
1x PLA Clip, 0.2mm layer, 2 walls, 15% infill
0.2O Standard
1
Reply
Print Profile
40x PLA Clips, 0.2mm layer, 2 walls, 15% infill
great fit
1
Reply
Print Profile
1x ABS Clip, 0.2mm layer, 2 walls, 15% infill
Excelente, funciona para lo que está diseñado.
0
Reply
Print Profile
1x PLA Clip, 0.2mm layer, 2 walls, 15% infill
Didn't really connect well to the spools from bambulab
(Edited)0
Reply
Print Profile
1x PLA Clip, 0.2mm layer, 2 walls, 15% infill
doesn't firmly hold the filament. clip is nice and snug though to the spool. I recommend a different clip
0
Reply
Print Profile
1x ABS Clip, 0.2mm layer, 2 walls, 15% infill
1
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld