The 3D model of a lightbox featuring the iconic Red Bull logo is a dynamic representation of energy and vitality. The Red Bull emblem, synonymous with endurance and exhilaration, takes center stage, vividly capturing the brand's spirit. This intricately designed rendition showcases the bull leaping in a powerful and dynamic pose, embodying strength and momentum. When illuminated, the lightbox comes to life, radiating the essence of Red Bull's vigor and vitality. Let this lightbox invigorate your space, infusing it with the high-octane spirit that Red Bull is renowned for. 🚀🔴

Materials and tools:
- glue gun
- aluminum tape
- led strip (here is the one I use): simple 1m white led USB

- soldering iron (optional)

RECOMMENDATIONS

- use a textured PEI sheet
- use the print profile, it has quite a few setting changes that help achieve the best results
- make a hole for the USB strip wherever you like it best with the soldering iron or in the slicer

- use the aluminum tape on the inside of the backplate to help with light diffusion
- glue the LED's the further away from the colored design possible; placing them too close ruins the diffusion and the individual LED's become visible

Bambu Studio Settings:
I always recommend using the print profile I provided since it has settings with which I've been able to get the best results.
If you choose not to here are the main slicer settings I recommend:
- preferences (ctrl+P) → activate developer settings → Quality →Advanced → First Layer Flow Ratio: 1.04
- Quality → Wall generator → Arachne
- Quality → Wall transitioning treshold angle → 50º
- Strength → Advanced → Infill/wall overlap → 20%

Assembly video: