A cutout of the little red-haired girl from Charlie Brown. She is 450mm tall (~18") and has a stand to hold her upright. She prints in different parts so that she can fit on a 250x250 build plate and is held together using pegs that are also printed.
Requires a 2 AMS system to print in full color else you can change the gloves to white and the hot chocolate strips to the same color to print on a single AMS system.
If you are customizing the print make sure you have at least 6 solid layers for the surface so the the infill pattern does not show through.
Note: If you wish to use another color but only have a single AMS system you can pause the print around layer 50 and swap the black for another color. After layer 49 the black is no longer used.