Some spider web wall art for Halloween with a cute spider on top! The design features a 10mm hole at the top so it can easily be hung from nails or other things on walls to help celebrate Halloween.

The model demonstrates the capabilities of your Bambu Labs printer in various ways, firstly by printing the web part of the design in one single continuous spiral creating many bridges in the process to form the web, by printing the thin legs at sharp angles to demonstrate its abilities with overhangs and also its excellent multi-colour capabilities.

If you would like to view the 3D model in colour in your browser and with optional AR, this is available directly at the Shapr3D viewer here.

Printing

There is a pre-painted file for Bambu users, as well as a separate normal 3MF file. Bambu users should have arachne walls pre-selected. I hear that in Cura or PrusaSlicer you should select Print Thin Walls to make the print work, but have not tested these slicers personally. Please use a 0.2 mm layer height and a 0.4 nozzle.

Please use care when removing this model from the build plate!

Support

If you like my work, please consider joining my club on Printables, thank you!