Heineken Lightbox LED Lamp by Nico91

Nico91

Art>Signs & Logos

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 2 walls, 15% infill

Designer

7.1 h

3 plates

5.0(3)

0.2mm nozzle

Designer

32.2 h

3 plates

Boost

Released

Description

Heineken Lightbox.

For best results use this profile.

Bambu Studio Settings

1. First Layer Flow Ratio: 1.08. (Developer settings).
2. Wall generator → Arachne.
3. Set Quality → Wall transitioning threshold angle to 50º.
4. In Strength → Advanced, adjust Infill/wall overlap to 20% to 25%.
5. Quality → Advanced → Activate "Avoid crossing walls."
6. Order the colors from the lightest to the darkest.

7. First layer speeds, 30mms and 60mms for first layer infill.

Comment & Rating (9)

@thierrytechno

Print Profile

0.2mm layer, 2 walls, 15% infill

(Edited)

The designer has replied

@Nico91

I changed the profile. Now there should be no more problems. Please keep me updated.

@thierrytechno

Replying to @Nico91 :

I have reprinted with your new profile and there is still a huge gap at the top under NEEL. look at the picture below. Best regards

(Edited)

@Nico91

Replying to @thierrytechno :

Hello, I adjusted the file again in Fusion. With a 0.4mm nozzle it is now possible. For a better result, I created a 0.2mm nozzle profile. Hope it works better now.

@isa_scrap86

Print Profile

0.2mm layer, 2 walls, 15% infill

@user_1804273624

Print Profile

0.2mm layer, 2 walls, 15% infill

No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.