One Piece Luffy (Hue Forge)
One Piece Luffy (Hue Forge)
Print Profile(2)
Description
For 0.2 mm nozzle Print at 100% infill with a layer height of 0.08mm with a base layer of 0.14mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Orange Transmission Distance: 10
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Jade White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #7 (0.62mm) swap to Orange
At layer #15 (1.26mm) swap to Yellow
At layer #20 (1.66mm) swap to Jade White for the rest.
For 0.4mm nozzle Print at 100% infill with a layer height of 0.08mm with a base layer of 0.14mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Orange Transmission Distance: 10
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Jade White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #6 (0.54mm) swap to Orange
At layer #14 (1.18mm) swap to Yellow
At layer #22 (1.82mm) swap to Jade White for the rest.
Comment & Rating (8)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
