Summary

This is a mount for the Anova Precision Cooker.

Al you need is a storage box with a lid. Cut a hole in the lid of around 74mm in diameter and glue the ring in place. My box is made of polypropylene, so it is quite hard to glue.
What worked for me is high temperature hot melt, which seems to withstand the sous vide temperatures quite well. It is applied underneath the flange and some extra glue underneath the lid.

Another advantage is that no more steam or moist is getting sucked in the cooker. I read some stories that this cooker got damaged when used with an open container.

Read the note on materials below.

Happy sous vide-ing ! :-)

*Edit: Needless to say, but the STL needs to be printed with the flange on the bed. Not the way it is visible in the preview.

*2nd Edit: Added a version that is 10mm longer.

Print Settings

Rafts:

No

Supports:

No

Resolution:

.2

Notes:

Don't use PLA. PLA's low glass transition temperature makes it unusable for this thing. Mine was printed in ABS. But other materials like ColorFabb_HT should do the job just fine.