Multicolor Vault-Tec Logo Magnet
Boost
72
97
9
Print Profile(3)
0.2mm nozzle, 0.14mm layer, 4 walls, 15% infill
Designer
1.3 h
1 plate
100x100x1mm X1C Profil 0.2mm layer, 2 walls, 15% infill
50 min
1 plate
230x230x1mm X1C Profil 0.2mm layer, 2 walls, 15% infill
2 h
1 plate
Boost
72
97
9
1
159
84
Released
Description
I recommend printing with a .2mm nozzle at .14mm layer height.
The best sheet magnets I have found to use with this model is Marietta Magnetics brand 30mil (with adhesive).
Comment & Rating (9)
All
Print Profile
0.2mm nozzle, 0.14mm layer, 4 walls, 15% infill
Great print. very easy with the AMS.
1
Reply
Print Profile
0.2mm nozzle, 0.14mm layer, 4 walls, 15% infill
looks great stuck a magnet to it lives on the fridge
1
Reply
Print Profile
0.2mm nozzle, 0.14mm layer, 4 walls, 15% infill
0
Reply
Print Profile
0.2mm nozzle, 0.14mm layer, 4 walls, 15% infill
0
Reply
Print Profile
0.2mm nozzle, 0.14mm layer, 4 walls, 15% infill
0
Reply
Print Profile
0.2mm nozzle, 0.14mm layer, 4 walls, 15% infill
0
Reply
Print Profile
0.2mm nozzle, 0.14mm layer, 4 walls, 15% infill
0
Reply
Print Profile
0.2mm nozzle, 0.14mm layer, 4 walls, 15% infill
0
Reply
Print Profile
0.2mm nozzle, 0.14mm layer, 4 walls, 15% infill
0
Reply
No more
License
This work is licensed under a
Creative Commons Attribution-Share AlikeRelated Models
© 2024 MakerWorld