Hinged box - Boxes in box - storage box - free layout - customizable:

Ever needed to store those little parts, but eventually they end up in a drawer all together? No more. This storage box is the ideal solution to keep things organized.

The layout of the box is fully customizable. Just print those little boxes you want and start organizing.

You can take those little boxes out of the big box for your convenience.

A hinged box print in place, in 1 piece. No assembly needed.

The box has an inner closing mechanism to keep the lid closed.

There are 2 build plates for this box, 1 for the big box and 1 for the little boxes.

Inner locking system:

• Simple to print model
• Low cost print
• Your perfect organizer
• No assembly for the box

Customizable layout:

• The second build plate has some boxes selected, but you can choose the size and the number you want.
• The boxes are in the following formats:
  • 30mm x30mm
  • 30mm x 60mm
  • 30mm x 120mm
• There are 2 boxes (30x60) with a small rounded edge on the front, this is to allow to close the lid. Please make sure you use always 2 of those boxes and place them in the front.

Free layout:

Rounded edges for the front side:

Dimensions for the box:

• Width: 125 mm
• Height: 12 mm for top and bottom, 24 mm in total when closed
• Length: 125 mm

Guide for the box:

• When you printed the box, please let it cool down completely
• Gently start moving the lid towards the bottom part to start movement
• The hinges are very strong and you can open and close the box hundreds of times without any problem

Print time and used material:

For the BIG box:

• Print time: 2 hours 10 minutes
• PLA filament, approximately 99gr
• Choose your own color

For the little boxes:

• Print time: 1 hour 44 minutes
• PLA filament, approximately 50gr
• Choose your own color

If you find my model useful, please like :-)

My other models: https://makerworld.com/en/u/1830894672