Yes I now realize it looks like an air cleaner filter... :)
Bowl is 194mm in diameter / 10mm wall thickness
I printed with 15%infill and its water tight on a Bambu Labs Printer
V5/6 - Has 3 parts with a screw on top.
Eventually Ill add new designs to re-skins this part.
Just screw the top off and slip on a new design.
Pot - No supports, 15% infill, I used grid infill
Design part - No supports, Brim is needed
Lid screw - Need flipped upside down, 20-30% infill, No supports