Print in place hinged dice box, uses four 6x3mm magnets for closure. Hinges print in place with no supports. Included is a test print to make sure your printer has the tolerances for hinges.
Changed a few settings and did a little painting to print a pair of these in opposing contrasting colors with only 11 swaps on a single plate. Model is great, magnets were a tiny bit loose but that's what CA glue is for (and magnets are never exactly the same from one brand to another anyway).
The only thing I can fault is the use of grid infill, I had to change that to gyroid. Will add my profile if anyone needs a contrasting set.