The daughter liked to use this switch all the time but never flipped it back off, creating switch chaos. So, I threw in a little barrier that slows her down or makes her think. It fit and worked like a champ.

I printed 4 of these in 40 minutes. No changes to the profile except used my A1 mini and changed the top layer to Hilbert Curve. Don't recommend the top layer change. That's on me. :-) Within an hour, I have 4 switches managed. Highly recommend especially since you can still flip the switch if you need to but it's "softly" locked as a reminder.

This print is great. I actually had a power issue in my house and my auto lights decided to misbehave. With this cover, I was able to quickly revert back to the "old" way of turning on the lights.

these things are great! keep people from flipping switches that don't need to be flipped but leaves it's accessible if needed.

works as intended!

Printed perfectly on BL P1S with 0.4 Nozzle & BL PLA. Works awesome to keep my daughter from turning off light switches.

These are awesome. I have printed and used them a few times now. X1C - PLA Black 220/65

Printed using Overture PETG at 0.12mm layer height with solid infill. Works great.

average rating just for points