LoveSac Sactional All-Purpose Mug Holder by ben.hallauer

ben.hallauer

Household>Other House Models

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

0.2mm layer, 2 walls, 15% infill

Designer

8.2 h

1 plate

4.7(10)

0.2mm layer, 2 walls, 15% infill

10.3 h

1 plate

Boost

Released

Description

LoveSac makes a really good cupholder for their couches, but it has trouble with mugs because of the handles.

Designed this to remedy that problem.

Things to note:

it fits the couch sides/backs more tightly than the one from the retail store.
it is designed to fit normal and larger size mugs, so if you have a small tapered mug, this might be too big.

Printing notes:

Print this in side or upside down orientation, but you will need supports.
Highly recommend 4-5 levels for the top most surface layer.
Legs should run, at minimum, 20% infill to prevent too much flexing when placing on the couch.

Comment & Rating (11)

@logicalapex

Print Profile

0.2mm layer, 2 walls, 15% infill

Great models. printed well, but does have some stringing due to gravity.

@user_915706235

Great addition to my Lovesac! fits perfectly and works as designed. I did have the stringing in the portion where the cup sits and it is really difficult to remove. But otherwise, very happy with the print. I took a pic next to one of the Lovesac ones so you can the difference.

@MagicJJ

Print Profile

0.2mm layer, 2 walls, 15% infill

the width fits the couch perfectly. I had some stringing on the edges and the slot where the cup sits. I will need to figure out how to resolve the issue where it's stringing.

@Linderblood.fam

Print Profile

0.2mm layer, 2 walls, 15% infill

I love that this is on here, because printing two of these pays for the printer based on the expense of them from the store. I printed as one of my first projects so I'm sure my issues were me. That said, definitely print with supports, because there were issues when I did not on certain spots.