Hello colleagues, this time I made a wolf with HueForge.
I have tried 4 colors but I think the result is much better with 5.
I am attaching the files so you can make all the remixes and tests you want.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PLA PolyLite Starlight Neptune Transmission Distance: 1
PLA PolyLite Pro Polymaker Teal Transmission Distance: 0.5
PLA PolyTerra Pastel Ice Transmission Distance: 1.5
PLA PolyTerra Cotton White Transmission Distance: 2.5
!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Starlight Neptune
At layer #16 (1.36mm) swap to Polymaker Teal
At layer #21 (1.76mm) swap to Pastel Ice
At layer #28 (2.32mm) swap to Cotton White for the rest.